// CODE SNIPPET
Section 1110 Values for Continuous Flow
JUMP TO FULL CODE CHAPTER
Where there is a continuous or semicontinuous discharge into the building storm drain or building storm sewer, such as from a pump, ejector, air conditioning plant or similar device, each gallon per minute (L/m) of such discharge shall be computed as being equivalent to 96 square feet (9 m2) of roof area, based on a rainfall rate of 1 inch (25.4 mm) per hour.
Related Code Sections
Section 1110 Storm Drainage, Values for Continuous Flow
Where there is a continuous or semicontinuous discharge into the building storm drain or building storm sewer , such as from a pump, ejector, air ...
709.3 Sanitary Drainage, Values for Continuous and Semicontinuous Flow
Drainage fixture unit values for continuous and semicontinuous flow into a drainage system shall be computed on the basis that 1 gpm (0.06 L/s ...
Plumbing Code 2012 of Tennessee > 7 Sanitary Drainage > 709 Fixture Units > 709.3 Values for Continuous and Semicontinuous Flow
1111.2 Storm Drainage, Control Devices
The control devices shall be installed so that the rate of discharge of water per minute shall not exceed the values for continuous flow as indicated ...
Plumbing Code 2012 of Tennessee > 11 Storm Drainage > 1111 Controlled Flow Roof Drain Systems > 1111.2 Control Devices
Section P3004 Sanitary Drainage, Determining Drainage Fixture Units
L.
For a continuous or semicontinuous flow into a drainage system, such as from a pump or similar device, 1.5 fixture units shall be allowed per ...
Residential Code 2009 of Tennessee > 30 Sanitary Drainage > P3004 Determining Drainage Fixture Units
Section P3004 Sanitary Drainage, Determining Drainage Fixture Units
baths 3.5 baths 7 8 9 10 11 For SI: 1 gallon = 3.785 L, 1 gallon per minute = 3.785 L/m. For a continuous or semicontinuous flow ...
Residential Code 2018 of Tennessee > 30 Sanitary Drainage > P3004 Determining Drainage Fixture Units