// CODE SNIPPET
P-1005.4.1 Unstable Soil
Related Code Sections
P-1005.4.1 Storm Water Drainage Piping, Unstable Soil
When installed in filled or unstable ground, the house storm drain shall be of cast iron or hard temper copper of a weight not less than type "L" ...
Philadelphia Plumbing Code > 10 Storm Water Drainage Piping > P-1005 Materials > P-1005.4 House Storm Drains > P-1005.4.1 Unstable Soil
P-902.3.3 Soil and Waste Piping, Unstable Soil
When a house drain is installed in filled or unstable ground, it shall be of cast iron or hard temper copper tube of a weight not less than type "L ...
Philadelphia Plumbing Code > 9 Soil and Waste Piping > P-902 Materials > P-902.3 House Drains > P-902.3.3 Unstable Soil
1810.4.1.2 Soils and Foundations, Casing
Where cast-in-place deep foundation elements are formed through unstable soils and concrete is placed in an open-drilled hole, a casing shall ...
2018 Philadelphia Building Code > 18 Soils and Foundations > 1810 Deep Foundations > 1810.4 Installation > 1810.4.1 Structural Integrity > 1810.4.1.2 Casing
P2604.1 General Plumbing Requirements, Trenching and Bedding
granular material. Piping shall not be supported on rocks or blocks at any point. Rocky or unstable soil shall be over-excavated by two or more pipe ...
2018 Philadelphia Residential Code > 26 General Plumbing Requirements > P2604 Trenching and Backfilling > P2604.1 Trenching and Bedding