// CODE SNIPPET
(4) Ungrounded DC Systems
JUMP TO FULL CODE CHAPTER
A switchboard, switchgear, or panelboard containing an ungrounded dc electrical system in accordance with 250.169 shall be legibly and permanently field marked as follows:
CAUTION: UNGROUNDED DC SYSTEM OPERATING — _____ VOLTS BETWEEN CONDUCTORS
Related Code Sections
(4) Equipment for General Use, Ungrounded DC Systems
A switchboard, switchgear, or panelboard containing an ungrounded dc electrical system in accordance with 250.169 shall be legibly and permanently ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.3 Support and Arrangement of Busbars and Conductors > (F) Switchboard, Switchgear, or Panelboard Identification > (4) Ungrounded DC Systems
712.30 Special Conditions, System Voltage
and ungrounded dc systems. Informational Note: Examples of nominal dc system voltages include but are not limited to 24, 48, 125, 190/380, or 380 ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 712 Direct Current Microgrids > 712.30 System Voltage
250.169 Wiring and Protection, Ungrounded Direct-Current Separately Derived Systems
Except as otherwise permitted in 250.34 for portable and vehicle-mounted generators, an ungrounded dc separately derived system supplied from a stand ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.169 Ungrounded Direct-Current Separately Derived Systems
522.25 Special Occupancies, Ungrounded Control Circuits
Separately derived ac circuits and systems 50 volts or greater and 2-wire dc circuits and systems 60 volts or greater shall be permitted ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 522 Control Systems for Permanent Amusement Attractions > 522.25 Ungrounded Control Circuits
240.15 Wiring and Protection, Ungrounded Conductors
with identified handle ties shall be permitted as the protection for each ungrounded conductor, if the systems have a grounded neutral point ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.15 Ungrounded Conductors