// CODE SNIPPET
1910.215(c)(1)(i)(f) Types 27 and 28 Wheels
Related Code Sections
1910.215(c)(1)(i)(f) Machinery and Machine Guarding, Types 27 and 28 Wheels
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(c) Flanges > 1910.215(c)(1) General Requirements > 1910.215(c)(1)(i) Exceptions > 1910.215(c)(1)(i)(f) Types 27 and 28 Wheels
1910.211(b)(6) Machinery and Machine Guarding, Types 27 and 28 Depressed Center Wheels
Types 27 and 28 depressed center wheels mean wheels having diameter, thickness, and hole size dimensions. Both types are reinforced, organic bonded ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(b) > 1910.211(b)(6) Types 27 and 28 Depressed Center Wheels
1910.211(b)(6)(ii) Machinery and Machine Guarding,
Mounts which are affixed to the wheel by the manufacturer may not require an inside nut and shall not be reused ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(b) > 1910.211(b)(6) Types 27 and 28 Depressed Center Wheels > 1910.211(b)(6)(ii)
1910.211(b)(6)(i) Machinery and Machine Guarding, Limitations
Special supporting, back adapter and inside flange nuts are required for the proper mounting of these types of wheels subject to limitations ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(b) > 1910.211(b)(6) Types 27 and 28 Depressed Center Wheels > 1910.211(b)(6)(i) Limitations
1910.243(c)(1)(ii)(c) Hand and Portable Powered Tools and Other Hand-Held Equipment, Exception
The spindle end, nut, and outer flange may be exposed on portable machines designed for, and used with, type 6, 11, 27, and 28 abrasive wheels ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.243 Guarding of Portable Powered Tools > 1910.243(c) Portable Abrasive Wheels > 1910.243(c)(1) General Requirements > 1910.243(c)(1)(ii)(c) Exception