// CODE SNIPPET
M1804.1 Type of Vent Required
JUMP TO FULL CODE CHAPTER
Appliances shall be provided with a listed and labeled venting system as set forth in Table M1804.1.
|VENT TYPES||APPLIANCE TYPES|
|Type L oil vents||Oil-burning appliances listed and labeled for
venting with Type L vents
|Pellet vents||Pellet fuel-burning appliances listed and
labeled for use with pellet vents
Related Code Sections
M1804.1 Chimneys and Vents, Type of Vent Required
CHART VENT TYPES APPLIANCE TYPES Type L oil vents Oil-burning appliances listed and labeled for venting with Type L vents ...
2015 Michigan Residential Code > 18 Chimneys and Vents > M1804 Vents > M1804.1 Type of Vent Required
M1803.3.4 Chimneys and Vents, Clearance
Reduction of required clearances is permitted as in Table M1306.2. Where listed Type L vent piping is used, the clearance shall be in accordance ...
2015 Michigan Residential Code > 18 Chimneys and Vents > M1803 Chimney and Vent Connectors > M1803.3 Installation > M1803.3.4 Clearance
G2427.12.1 Fuel Gas, (503.12.1) Appliances Requiring Draft Hoods
Vented appliances shall be installed with draft hoods. Exception: Dual oven-type combination ranges; direct-vent appliances ; fan-assisted ...
2015 Michigan Residential Code > 24 Fuel Gas > G2427 (503) Venting of Appliances > G2427.12 (503.12) Draft Hoods and Draft Controls > G2427.12.1 (503.12.1) Appliances Requiring Draft Hoods
G2428.2.9 Fuel Gas, (504.2.9) Chimney and Vent Locations
Tables G2428.2(1) and G2428.2(2) shall be used only for chimneys and vents not exposed to the outdoors below the roof line. A Type B vent or listed ...
2015 Michigan Residential Code > 24 Fuel Gas > G2428 (504) Sizing of Category I Appliance Venting Systems > G2428.2 (504.2) Application of Single Appliance Vent Tables G2428.2(1) and G2428.2(2) > G2428.2.9 (504.2.9) Chimney and Vent Locations