// CODE SNIPPET
507.3.3 Type II Hoods Joint, Seams and Penetrations
Related Code Sections
507.3.3 Exhaust Systems, Type II Hoods Joint, Seams and Penetrations
Joints, seams and penetrations for Type II hoods shall be constructed as set forth in Chapter 6, shall be sealed on the interior of the hood ...
Mechanical Code 2015 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.3 Type II Hoods > 507.3.3 Type II Hoods Joint, Seams and Penetrations
507.3.3 Exhaust Systems, Type II Hoods Joint, Seams and Penetrations
Joints, seams and penetrations for Type II hoods shall be constructed as set forth in Chapter 6, shall be sealed on the interior of the hood ...
Mechanical Code 2018 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.3 Type II Hoods > 507.3.3 Type II Hoods Joint, Seams and Penetrations
Section 507 Exhaust Systems, Commercial Kitchen Hoods
Joints, seams and penetrations for Type II hoods shall be constructed as set forth ...
506.3.2 Exhaust Systems, Joints, Seams and Penetrations of Grease Ducts
Joints, seams and penetrations of grease ducts shall be made with a continuous liquid-tight weld or braze made on the external surface of the duct ...
Mechanical Code 2018 of Utah > 5 Exhaust Systems > 506 Commercial Kitchen Hood Ventilation System Ducts and Exhaust Equipment > 506.3 Ducts Serving Type I Hoods > 506.3.2 Joints, Seams and Penetrations of Grease Ducts
506.3.2 Exhaust Systems, Joints, Seams and Penetrations of Grease Ducts
Joints, seams and penetrations of grease ducts shall be made with a continuous liquid-tight weld or braze made on the external surface of the duct ...
Mechanical Code 2015 of Utah > 5 Exhaust Systems > 506 Commercial Kitchen Hood Ventilation System Ducts and Exhaust Equipment > 506.3 Ducts Serving Type I Hoods > 506.3.2 Joints, Seams and Penetrations of Grease Ducts