// CODE SNIPPET

1926.1414(e)(1)(i) Type I Rotation Resistant Wire Rope ("Type I")

OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1414 Wire Rope--Selection and Installation Criteria > 1926.1414(e) Rotation Resistant Ropes > 1926.1414(e)(1) Definitions > 1926.1414(e)(1)(i) Type I Rotation Resistant Wire Rope ("Type I")

JUMP TO FULL CODE CHAPTER

Type I rotation resistant rope is stranded rope constructed to have little or no tendency to rotate or, if guided, transmits little or no torque. It has at least 15 outer strands and comprises an assembly of at least three layers of strands laid helically over a center in two operations. The direction of lay of the outer strands is opposite to that of the underlying layer.

Related Code Sections

1926.1414(e)(1)(i) Cranes & Derricks in Construction, Type I Rotation Resistant Wire Rope ("Type I")

Type I rotation resistant rope is stranded rope constructed to have little or no tendency to rotate or, if guided, transmits little or no torque. It ...

1926.1414(e)(2)(iii) Cranes & Derricks in Construction,

Type I must have an operating design factor of no less than 5, except where the wire rope manufacturer and the equipment manufacturer approves ...

1926.97(a)(1)(ii)(G) Personal Protective and Life Saving Equipment,

Nonozone-resistant equipment shall be marked Type I ...

OSHA 1926 Construction > E Personal Protective and Life Saving Equipment > 1926.97 Electrical Protective Equipment > 1926.97(a) Design Requirements for Specific Types of Electrical Protective Equipment > 1926.97(a)(1) Manufacture and Marking of Rubber Insulating Equipment > 1926.97(a)(1)(ii) > 1926.97(a)(1)(ii)(G)

1926.97(a)(1)(ii) Personal Protective and Life Saving Equipment,

Nonozone-resistant equipment shall be marked Type I ...

1926.97(a)(1) Personal Protective and Life Saving Equipment, Manufacture and Marking of Rubber Insulating Equipment

Nonozone-resistant equipment shall be marked Type I ...