// CODE SNIPPET
1910.211(d)(56) Turnover Bar
JUMP TO FULL CODE CHAPTER
Turnover bar means a bar used in die setting to manually turn the crankshaft of the press.
Related Code Sections
1910.211(d)(56) Machinery and Machine Guarding, Turnover Bar
Turnover bar means a bar used in die setting to manually turn the crankshaft of the press ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(d) > 1910.211(d)(56) Turnover Bar
1910.217(d)(9)(ii) Machinery and Machine Guarding,
The employer shall provide spring loaded turnover bars, for presses designed to accept such turnover bars ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(d) Design, Construction, Setting and Feeding of Dies > 1910.217(d)(9) Diesetting > 1910.217(d)(9)(ii)
1910.261(e)(8) Special Industries, Barker Feed
Each barker shall be equipped with a feed and turnover device which will make it unnecessary for the operator to hold a bolt or log by hand during ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(e) Preparing Pulpwood > 1910.261(e)(8) Barker Feed
1910.262(bb)(2) Special Industries, Safety Stop Bar
A safety trip rod, cable or wire center cord shall be provided across the front and back of all rope washers extending the length of the face ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(bb) Rope Washers > 1910.262(bb)(2) Safety Stop Bar
1910.263(h)(2) Special Industries, Emergency Stop Bar
An emergency stop bar shall be provided, and so located that the body of the operator will press against the bar if the operator slips and falls ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(h) Manually Fed Dough Brakes > 1910.263(h)(2) Emergency Stop Bar