// CODE SNIPPET
1910.241(b)(2) Tuck Pointing
Go To Full Code Chapter
Removal, by grinding, of cement, mortar, or other nonmetallic jointing material.
Upcodes Diagrams
Related Code Sections
1910.241(b)(2) Hand and Portable Powered Tools and Other Hand-Held Equipment, Tuck Pointing
Removal, by grinding, of cement, mortar, or other nonmetallic jointing material ...
1910.243(c)(1)(ii)(c) Hand and Portable Powered Tools and Other Hand-Held Equipment, Exception
, cutting off wheels, and tuck pointing wheels ...
1910.184(h)(3)(iii) Materials Handling and Storage,
Strand end tails shall not be trimmed flush with the surface of the rope immediately adjacent to the full tucks. This applies to all types of fiber ...
1910.184(h)(3) Materials Handling and Storage, Splicing
: In manila rope, eye splices shall consist of at least three full tucks, and short splices shall consist of at least six full tucks, three on each ...
1910.184(h)(3)(i) Materials Handling and Storage,
In manila rope, eye splices shall consist of at least three full tucks, and short splices shall consist of at least six full tucks, three on each ...