// CODE SNIPPET
2303.4.2 Truss Placement Diagram
JUMP TO FULL CODE CHAPTER
The truss manufacturer shall provide a truss placement diagram that identifies the proposed location for each individually designated truss and references the corresponding truss design drawing. The truss placement diagram shall be provided as part of the truss submittal package, and with the shipment of trusses delivered to the job site. Truss placement diagrams that serve only as a guide for installation and do not deviate from the permit submittal drawings shall not be required to bear the seal or signature of the truss designer.
Related Code Sections
2303.4.2 Wood, Truss Placement Diagram
The truss manufacturer shall provide a truss placement diagram that identifies the proposed location for each individually designated truss ...
Building Code 2018 of Illinois > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.2 Truss Placement Diagram
(B) Equipment for General Use, Diagram
A permanent, single-line diagram of the switchgear shall be provided in a readily visible location within the same room or enclosed area ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.48 Substation Design, Documentation, and Required Diagram > (B) Diagram
26.6.2 Construction Documents and Inspection, Placement
tolerances during concrete placement. (b) Spiral units shall be continuous bar or wire placed with even spacing and without distortion beyond ...
Building Code Requirements for Structural Concrete of Illinois > 26 Construction Documents and Inspection > 26.6 Reinforcement Materials and Construction Requirements > 26.6.2 Placement
215.5 Wiring and Protection, Diagrams of Feeders
If required by the authority having jurisdiction, a diagram showing feeder details shall be provided prior to the installation of the feeders. Such ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 215 Feeders > 215.5 Diagrams of Feeders
909.15 Fire Protection and Life Safety Systems, Control Diagrams
Identical control diagrams showing all devices in the system and identifying their location and function shall be maintained current and kept on file ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.15 Control Diagrams