// CODE SNIPPET
107.7.5 Truss Forces
JUMP TO FULL CODE CHAPTER
Where trusses are employed, a diagram or table shall indicate the loads or moments in the various members under the design loading conditions. The requirement for a diagram or table may be waived when the trusses consist of elements selected from load tables or similar data, subject to the requirements for verification described in this code.
Related Code Sections
106.7.5 Administration, Truss Forces
Where trusses are employed, a diagram or table shall indicate the loads or moments in the various members under the design loading conditions. The ...
NYC Building Code 2008 > 1 Administration > 106 Construction Documents > 106.7 Structural Plans > 106.7.5 Truss Forces
107.7.5 Administration, Truss Forces
Where trusses are employed, a diagram or table shall indicate the loads or moments in the various members under the design loading conditions. The ...
NYC Building Code 2014 > 1 Administration > 107 Construction Documents > 107.7 Structural Plans > 107.7.5 Truss Forces
2303.4 Wood, Trusses
or maximum deflection for live and total load; 17. Maximum axial compression forces in the truss members to design the size, connections ...
2305.1.5 Wood, Wood Members Resisting Horizontal Seismic Forces Contributed by Masonry and Concrete
Wood shear walls, diaphragms, horizontal trusses and other members shall not be used to resist horizontal seismic forces contributed by masonry ...
NYC Building Code 2008 > 23 Wood > 2305 General Design Requirements for Lateral-Force-Resisting Systems > 2305.1 General > 2305.1.5 Wood Members Resisting Horizontal Seismic Forces Contributed by Masonry and Concrete
2303.4.1.1 Wood, Truss Design Drawings
and total load as applicable;
Maximum axial tension and compression forces in the truss members; and
Required permanent individual truss member ...
NYC Building Code 2014 > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.1 Design > 2303.4.1.1 Truss Design Drawings