// CODE SNIPPET
803.7.3 Trim
JUMP TO FULL CODE CHAPTER
Foam plastic shall be allowed for trim in accordance with Section 804.2.
Related Code Sections
348.28 Wiring Methods and Materials, Trimming
All cut ends shall be trimmed or otherwise finished to remove rough edges, except where fittings that thread into the convolutions are used ...
National Electrical Code, 2020 > 3 Wiring Methods and Materials > 348 Flexible Metal Conduit: Type FMC > 348.28 Trimming
350.28 Wiring Methods and Materials, Trimming
All cut ends of conduit shall be trimmed inside and outside to remove rough edges ...
National Electrical Code, 2020 > 3 Wiring Methods and Materials > 350 Liquidtight Flexible Metal Conduit: Type LFMC > 350.28 Trimming
352.28 Wiring Methods and Materials, Trimming
All cut ends shall be trimmed inside and outside to remove rough edges ...
National Electrical Code, 2020 > 3 Wiring Methods and Materials > 352 Rigid Polyvinyl Chloride Conduit: Type PVC > 352.28 Trimming
353.28 Wiring Methods and Materials, Trimming
All cut ends shall be trimmed inside and outside to remove rough edges ...
National Electrical Code, 2020 > 3 Wiring Methods and Materials > 353 High Density Polyethylene Conduit: Type HDPE Conduit > 353.28 Trimming
354.28 Wiring Methods and Materials, Trimming
For termination, the conduit shall be trimmed away from the conductors or cables using an approved method that will not damage the conductor or cable ...
National Electrical Code, 2020 > 3 Wiring Methods and Materials > 354 Nonmetallic Underground Conduit With Conductors: Type NUCC > 354.28 Trimming