// CODE SNIPPET
B 101.5 Trap Sizes
Related Code Sections
1101.15.2 Storm Drainage, Trap Size
Traps, where installed for individual conductors, shall be the same size as the horizontal drain to which they are connected ...
2021 Oregon Plumbing Specialty Code > 11 Storm Drainage > 1101.0 General > 1101.15 Traps on Storm Drains and Leaders > 1101.15.2 Trap Size
702.1 Sanitary Drainage, Trap Size
The unit equivalent of plumbing fixtures shown in Table 702.1 shall be based on the size of the trap required, and the unit equivalent of fixtures ...
2021 Oregon Plumbing Specialty Code > 7 Sanitary Drainage > 702.0 Fixture Unit Equivalents > 702.1 Trap Size
B 101.5 Explanatory Notes on Combination Waste and Vent Systems, Trap Sizes
Trap sizes are required to be equivalent to the branches they serve (two pipe sizes larger than normal), and tailpieces between fixtures or floor ...
2021 Oregon Plumbing Specialty Code > B Explanatory Notes on Combination Waste and Vent Systems > B 101.0 General > B 101.5 Trap Sizes
P3201.7 Traps, Size of Fixture Traps
Trap sizes for plumbing fixtures shall be as indicated in Table P3201.7. Where the tailpiece of a plumbing fixture is larger than that indicated ...
2021 Oregon Residential Specialty Code (ORSC) > 32 Traps > P3201 Fixture Traps > P3201.7 Size of Fixture Traps
908.2.3 Vents, Trap Arm
The length of the trap arm shall not exceed the limits in Table 1002.2. The trap size shall be in accordance with Section 1003.3. The vent pipe ...
2021 Oregon Plumbing Specialty Code > 9 Vents > 908.0 Wet Venting > 908.2 Horizontal Wet Venting for a Bathroom Group > 908.2.3 Trap Arm