// CODE SNIPPET
P3201.3 Trap Setting and Protection
JUMP TO FULL CODE CHAPTER
Traps shall be set level with respect to their water seals and shall be protected from freezing. Trap seals shall be protected from siphonage, aspiration or back pressure by an approved system of venting (see Section P3101).
Related Code Sections
P3201.3 Traps, Trap Setting and Protection
Traps shall be set level with respect to their water seals and shall be protected from freezing. Trap seals shall be protected from siphonage ...
Residential Code 2018 of Kansas > 32 Traps > P3201 Fixture Traps > P3201.3 Trap Setting and Protection
1002.7 Traps, Interceptors and Separators, Trap Setting and Protection
Traps shall be set level with respect to the trap seal and, where necessary, shall be protected from freezing ...
Plumbing Code 2018 of Kansas > 10 Traps, Interceptors and Separators > 1002 Trap Requirements > 1002.7 Trap Setting and Protection
909.1 Vents, Distance of Trap From Vent
Each fixture trap shall have a protecting vent located so that the slope and the developed length in the fixture drain from the trap weir ...
1002.4 Traps, Interceptors and Separators, Trap Seals
of emergency floor drain traps and trap seals subject to evaporation shall be protected by one of the methods in Sections 1002.4.1.1 through 1002.4.1.4 ...
Plumbing Code 2018 of Kansas > 10 Traps, Interceptors and Separators > 1002 Trap Requirements > 1002.4 Trap Seals