// CODE SNIPPET
707.14 Trap Arms
Go To Full Code Chapter
Cleanouts for trap arms shall be installed in accordance with Section 1002.3.
Upcodes Diagrams
Related Code Sections
707.14 Sanitary Drainage, Trap Arms
Cleanouts for trap arms shall be installed in accordance with Section 1002.3 ...
908.2.3 Vents, Trap Arm
The length of the trap arm shall not exceed the limits in Table 1002.2. The trap size shall be in accordance with Section 1003.3. The vent pipe ...
1002.3 Traps and Interceptors, Change of Direction
A trap arm shall be permitted to change direction without the use of a cleanout where such change of direction does not exceed 90 degrees (1.57 rad ...
911.1 Vents, Circuit Vent Permitted
vented. Each trap arm shall connect horizontally to the horizontal branch being circuit vented in accordance with Table 1002.2. The horizontal branch ...
1003.3 Traps and Interceptors, Size
pipe size larger than given in Table 702.1. The trap shall be the same size as the trap arm to which it is connected ...