// CODE SNIPPET
(A) Transmitting Current for Power Purposes
Related Code Sections
(A) Special Equipment, Transmitting Current for Power Purposes
Collector rings shall have a current rating not less than 125 percent of the full-load current of the largest device served plus the full-load ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 675 Electrically Driven or Controlled Irrigation Machines > 675.11 Collector Rings > (A) Transmitting Current for Power Purposes
725.144 Special Conditions, Transmission of Power and Data
Where Types CL3P, CL2P, CL3R, CL2R, CL3, or CL2 transmit power and data, the rated current per ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 725 Class 1, Class 2, and Class 3 Remote- Control, Signaling, and Power-Limited Circuits > 725.144 Transmission of Power and Data
(2) Wiring Methods and Materials, Current
General-purpose and appliance branch circuits shall have ratings not exceeding 20 amperes. Individual branch circuits shall have ratings ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 324 Flat Conductor Cable: Type FCC > 324.10 Uses Permitted > (B) Branch-Circuit Ratings > (2) Current
640.41 Special Equipment, Multipole Branch-Circuit Cable Connectors
or cable is not transmitted to the connections. The female half shall be attached to the load end of the power supply cord or cable. The connector shall ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 640 Audio Signal Processing, Amplification, and Reproduction Equipment > 640.41 Multipole Branch-Circuit Cable Connectors
(A) Special Conditions, Power Source
alarm control panel with integral power source; a circuit card listed for use as a PLFA source, where used as part of a listed assembly; a current ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 760 Fire Alarm Systems > 760.121 Power Sources for PLFA Circuits > (A) Power Source