// CODE SNIPPET
1910.265(c)(31) Traffic Control and Flow
JUMP TO FULL CODE CHAPTER
—
Railroad tracks and other hazardous crossings shall be plainly posted.
Pickup and unloading points and paths for lumber packages on conveyors and transfers and other areas where accurate spotting is required, shall be plainly marked and wheel stops provided where necessary.
Aisles, passageways, and roadways shall be sufficiently wide to provide safe side clearance. One-way aisles may be used for two-way traffic if suitable turnouts are provided.
All areas of restricted side or overhead clearance shall be plainly marked.
Related Code Sections
1910.265(c)(31) Special Industries, Traffic Control and Flow
, and roadways shall be sufficiently wide to provide safe side clearance. One-way aisles may be used for two-way traffic if suitable turnouts are provided ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(c) Building Facilities, and Isolated Equipment > 1910.265(c)(31) Traffic Control and Flow
1910.269(w)(6) Special Industries, Employee Protection in Public Work Areas
Traffic-control signs and traffic-control devices used for the protection of employees shall meet § 1926.200(g)(2) of this chapter ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(w) Special Conditions > 1910.269(w)(6) Employee Protection in Public Work Areas
1910.269(w)(6)(ii) Special Industries,
or flags and other traffic-control devices in conspicuous locations to alert and channel approaching traffic ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(w) Special Conditions > 1910.269(w)(6) Employee Protection in Public Work Areas > 1910.269(w)(6)(ii)
1910.268(d)(1) Special Industries,
control devices shall be placed conspicuously to alert and channel approaching traffic. Where further protection is needed, barriers shall be utilized ...
OSHA 1910 General Industry > R Special Industries > 1910.268 Telecommunications > 1910.268(d) Employee Protection in Public Work Areas > 1910.268(d)(1)
Appendix A Special Industries, Flow Charts
(Permit-required confined spaces), and between § 1910.269 and § 1910.147 (The control of hazardous energy (lockout/tagout)). These flow charts provide ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > A Flow Charts