// CODE SNIPPET
3314.8.7 Top Rail Design
JUMP TO FULL CODE CHAPTER
Each top rail or equivalent member of a guardrail system shall be capable of withstanding, without failure, a force applied in any downward or horizontal direction at any point along its top edge of at least:
Related Code Sections
3314.8.7 Safeguards During Construction or Demolition, Top Rail Design
Each top rail or equivalent member of a guardrail system shall be capable of withstanding, without failure, a force applied in any downward ...
NYC Building Code 2008 > 33 Safeguards During Construction or Demolition > 3314 Scaffolds > 3314.8 Guardrail System and Toeboards > 3314.8.7 Top Rail Design
Section 2407 Glass and Glazing, Glass in Handrails and Guards
Glass balusters shall not be installed without an attached handrail or guard. Exception: A top rail shall not be required where the glass balusters ...
Appendix A Selected Rules of the Department of Buildings [PDF] (page 53)
, riveted to the top and bottom rails, not more than six inches (6") apart on centers. Special designs must be submitted for any variation, and approved ...
§27-558 Loads, Live Loads for Sidewalks, Driveways, and Railings
dwellings, which shall be designed for a lateral force of twenty plf plus a vertical load of twenty plf, both applied at the top of the railing. The ...
NYC 1968 Code (Vol I) > 9 Loads > 3 Live Loads > §27-558 Live Loads for Sidewalks, Driveways, and Railings
E109.2.4 Supplementary Accessibility Requirements, Rail-To-Platform Height
platforms shall be 8 inches (203 mm) minimum above top of rail. Exception: Where vehicles are boarded from sidewalks or street level, low-level ...
NYC Building Code 2014 > E Supplementary Accessibility Requirements > E109 Transportation Facilities and Stations > E109.2 New Construction > E109.2.4 Rail-To-Platform Height