// CODE SNIPPET
[BS] 1404.6.1 Tolerances
Related Code Sections
1404.6.1 Exterior Walls, Tolerances
Anchored masonry veneers in accordance with Chapter 14 are not required to meet the tolerances in Article 3.3 F1 of TMS 602 ...
Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.6 Anchored Masonry Veneer > 1404.6.1 Tolerances
1029.14.2.2.1 Means of Egress, Construction Tolerances
The tolerance between adjacent risers on a stepped aisle that were designed to be equal height shall not exceed 3 / 16 inch (4.8 mm). Where ...
Building Code 2018 of Illinois > 10 Means of Egress > 1029 Assembly > 1029.14 Assembly Aisle Walking Surfaces > 1029.14.2 Stepped Aisles > 1029.14.2.2 Risers > 1029.14.2.2.1 Construction Tolerances
104.1.1 Application and Administration, Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum ...
2018 Illinois Accessibility Code > 1 Application and Administration > 104 Conventions > 104.1 Dimensions > 104.1.1 Construction and Manufacturing Tolerances
220.127.116.11 Construction Documents and Inspection,
Design information: (a) Tolerances on location of reinforcement taking into consideration tolerances on d and specified concrete cover ...
Building Code Requirements for Structural Concrete of Illinois > 26 Construction Documents and Inspection > 26.6 Reinforcement Materials and Construction Requirements > 26.6.2 Placement > 18.104.22.168
26.3 Construction Documents and Inspection, Member Information
Design information: (a) Member size, location, and related tolerances ...
Building Code Requirements for Structural Concrete of Illinois > 26 Construction Documents and Inspection > 26.3 Member Information