// CODE SNIPPET
Section R307 Toilet, Bath and Shower Spaces
JUMP TO FULL CODE CHAPTER
Fixtures shall be spaced in accordance with Figure R307.1, and in accordance with the requirements of Section P2705.1.
For SI: 1 inch = 25.4 mm.FIGURE R307.1
MINIMUM FIXTURE CLEARANCES
For SI: 1 inch = 25.4 mm.MINIMUM FIXTURE CLEARANCES
Bathtub and shower floors and walls above bathtubs with installed shower heads and in shower compartments shall be finished with a nonabsorbent surface. Such wall surfaces shall extend to a height of not less than 6 feet (1829 mm) above the floor.
Related Code Sections
Section R307 Building Planning, Toilet, Bath and Shower Spaces
Fixtures shall be spaced in accordance with Figure R307.1, and in accordance with the requirements of Section P2705.1.
For SI: 1 inch = 25.4 mm ...
1202.5.2.1 Interior Environment, Bathrooms
Rooms containing bathtubs, showers, spas and similar bathing fixtures shall be mechanically ventilated in accordance with the International ...
Building Code 2018 of Kansas > 12 Interior Environment > 1202 Ventilation > 1202.5 Natural Ventilation > 1202.5.2 Contaminants Exhausted > 1202.5.2.1 Bathrooms
3.3.2* Definitions, Bathroom
Within a dwelling unit, any room or compartment dedicated to personal hygiene, containing a toilet, sink, or bathing capability such as a shower ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 3 Definitions > 3.3 General Definitions > 3.3.2* Bathroom
1209.2 Interior Environment, Finish Materials
In other than dwelling units , toilet, bathing and shower room floor finish materials shall ...
Building Code 2018 of Kansas > 12 Interior Environment > 1209 Toilet and Bathroom Requirements > 1209.2 Finish Materials