// CODE SNIPPET
(B) To Be Visible
Related Code Sections
(B) Equipment for General Use, To Be Visible
Marking shall be located so as to be visible or easily accessible after installation ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 422 Appliances > 422.60 Nameplate > (B) To Be Visible
506.3.1 Exhaust Systems, To 506.3.2.4
in shafts or covered by coatings or wraps that prevent the duct from being visually inspected on all sides. It is permissible to test the duct in sections ...
Minnesota Mechanical Code 2015 > 5 Exhaust Systems > 506 Commercial Kitchen Hood Ventilation System Ducts and Exhaust Equipment > 506.3 Ducts Serving Type I Hoods > 506.3.1 To 506.3.2.4
2.17.16 Electric Elevators, Rail Lubricants and Lubrication Plate
LUBRICANT TO BE USED." If lubricants are not to be used, the plate shall so state. If lubricants other than those recommended by the manufacturer ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 2 Electric Elevators > 2.17 Car and Counterweight Safeties > 2.17.16 Rail Lubricants and Lubrication Plate
(B) Equipment for General Use, To Be Grounded
Receptacles and cord connectors that have equipment grounding conductor contacts shall have those contacts connected to an equipment grounding ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) > 406.4 General Installation Requirements > (B) To Be Grounded
430.104 Equipment for General Use, To Be Indicating
The disconnecting means shall plainly indicate whether it is in the open (off) or closed (on) position ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.104 To Be Indicating