// CODE SNIPPET
2107.3 TMS 402, Section 220.127.116.11, Splices of Reinforcement
JUMP TO FULL CODE CHAPTER
Modify Section 18.104.22.168 as follows:
- 22.214.171.124 — Splices of reinforcement. Lap splices, welded splices or mechanical splices are permitted in accordance with the provisions of this section. Welding shall conform to AWS D1.4. Welded splices shall be of ASTM A706 steel reinforcement. Reinforcement larger than No. 9 (M #29) shall be spliced using mechanical connections in accordance with Section 126.96.36.199.3.
Related Code Sections
2107.3 Masonry, TMS 402, Section 188.8.131.52, Splices of Reinforcement
Modify Section 184.108.40.206 as follows: 220.127.116.11 — Splices of reinforcement. Lap splices, welded splices or mechanical splices are permitted ...
2018 Philadelphia Building Code > 21 Masonry > 2107 Allowable Stress Design > 2107.3 TMS 402, Section 18.104.22.168, Splices of Reinforcement
2108.3 Masonry, TMS 402, Section 22.214.171.124.1, Splices
Modify Sections 126.96.36.199.2 and 188.8.131.52.3 as follows: 184.108.40.206.2 — A welded splice shall have the bars butted and welded to develop not less than 125 ...
2018 Philadelphia Building Code > 21 Masonry > 2108 Strength Design of Masonry > 2108.3 TMS 402, Section 220.127.116.11.1, Splices
Section 402 Special Detailed Requirements Based on Occupancy and Use, Covered Mall and Open Mall Buildings
The provisions of this section shall apply to buildings or structures defined herein as covered or open mall buildings not exceeding three floor ...
2018 Philadelphia Building Code > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings
R606.12.3.1 Wall Construction, Design Requirements
and Sections 8.1 and 8.3 of TMS 402, ACI 530/ASCE 5 and shall meet the minimum reinforcement requirements contained in Sections R606.12.3.2 ...
2018 Philadelphia Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.12 Seismic Requirements > R606.12.3 Seismic Design Category D0 or D1 > R606.12.3.1 Design Requirements
Section 402 Gas Piping Installations, (IFGS) Pipe Sizing
or sizing equations in accordance with Section 402.4 or 402.5 as applicable. The sizing tables included in a listed piping system's manufacturer's ...