// CODE SNIPPET
2107.4 TMS 402/ACI 530/ASCE 5, Section 2.3.7, Maximum Bar Size
Go To Full Code Chapter
Add the following to Chapter 2:
2.3.7 Maximum bar size. The bar diameter shall not exceed one-eighth of the nominal wall thickness and shall not exceed one-quarter of the least dimension of the cell, course or collar joint in which it is placed.
Upcodes Diagrams
Related Code Sections
2107.4 Masonry, TMS 402/ACI 530/ASCE 5, Section 2.3.7, Maximum Bar Size
Add the following to Chapter 2: 2.3.7 Maximum bar size. The bar diameter shall not exceed one-eighth of the nominal wall thickness and shall ...
Section 2101 Masonry, General
that autoclaved aerated concrete (AAC) masonry shall comply with the provisions of Section 2106 and Chapters 1 and 8 of TMS 402/ACI 530/ASCE 5 ...
2109.1 Masonry, General
Empirically designed masonry shall conform to the requirements of Chapter 5 of TMS 402/ACI 530/ASCE 5, except where otherwise noted in this section ...
1405.6 Exterior Walls, Anchored Masonry Veneer
to the requirements of Section 6.2.2.10 of TMS 402/ACI 530/ASCE 5 ...
2108.1 Masonry, General
The design of masonry structures using strength design shall comply with Section 2106 and the requirements of Chapters 1 and 3 of TMS 402/ACI 530 ...