// CODE SNIPPET
1324.5.5.1 Timeframe for Testing
2021 Oregon Plumbing Specialty Code > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1324.0 Performance Criteria and Testing Category 1 (Gases, Medical Surgical Vacuum) > 1324.5 Initial Pressure Tests — Medical Gas and Vacuum Systems > 1324.5.5 Standing Pressure Tests — Medical Vacuum Piping Systems > 1324.5.5.1 Timeframe for Testing
Go To Full Code Chapter
Tests shall be conducted after installation of all components of the vacuum system. [NFPA 99:5.1.12.2.7.1]
Related Code Sections
1324.5.5.1 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Timeframe for Testing
Tests shall be conducted after installation of all components of the vacuum system. [NFPA 99:5.1.12.2.7.1] ...
2021 Oregon Plumbing Specialty Code > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1324.0 Performance Criteria and Testing Category 1 (Gases, Medical Surgical Vacuum) > 1324.5 Initial Pressure Tests — Medical Gas and Vacuum Systems > 1324.5.5 Standing Pressure Tests — Medical Vacuum Piping Systems > 1324.5.5.1 Timeframe for Testing
1321.8.9 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Timeframe for Brazing
Joints shall be brazed within 8 hours after the surfaces are cleaned for brazing. [NFPA 99:5.1.10.4.3.13 ...
Section 1011 Boilers, Water Heaters and Pressure Vessels, Tests
Upon completion of the assembly and installation of boilers and pressure vessels, acceptance tests shall be conducted in accordance ...
104.11.2 Scope and Administration, Tests
to require tests as evidence of compliance to be made without expense to the jurisdiction. Test methods shall be as specified in this code or by other ...
107.3 Scope and Administration, Testing
Mechanical systems shall be tested as required in this code and in accordance with Sections 107.3.1 through 107.3.3. Tests shall be made ...