// CODE SNIPPET
1705A.5.6 Timber Connectors
JUMP TO FULL CODE CHAPTER
The installation of all split ring and shear plate timber connectors, and timber rivets shall be continuously inspected by an approved agency. The approved agency shall furnish the architect, structural engineer and the enforcement agency with a report verifying that the materials, timber connectors and workmanship conform to the approved construction documents.
Related Code Sections
1705A.5.6 Special Inspections and Tests, Timber Connectors
The installation of all split ring and shear plate timber connectors, and timber rivets shall be continuously inspected by an approved agency. The ...
Los Angeles Building Code > 17A Special Inspections and Tests > 1705A Required Special Inspections and Tests > 1705A.5 Wood Construction > 1705A.5.6 Timber Connectors
2303.4.1 Wood, Design
by nails, glue, bolts, timber connectors, metal connector plates or other approved framing devices ...
Los Angeles Building Code > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.1 Design
2303.4.1 Wood, Design
by nails, glue, bolts, timber connectors, metal connector plates or other approved framing devices ...
Los Angeles Building Code > 23 Wood > 2303 Minimum Standards and Quality > 2303.4 Trusses > 2303.4.1 Design
2304.11.1 Wood, Columns
by properly designed steel or iron caps, with pintles and base plates, or by timber splice plates affixed to the columns by metal connectors housed ...
Los Angeles Building Code > 23 Wood > 2304 General Construction Requirements > 2304.11 Heavy Timber Construction > 2304.11.1 Columns
2304.11.1.1 Wood, Columns
the columns support roof loads only. Where traditional heavy timber detailing is used, connections shall be by means of reinforced concrete or metal caps ...
Los Angeles Building Code > 23 Wood > 2304 General Construction Requirements > 2304.11 Heavy Timber Construction > 2304.11.1 Details of Heavy Timber Structural Members > 2304.11.1.1 Columns