// CODE SNIPPET
A4.203.1.1 Tier 1, Tier 2, and Zero Net Energy Design Prerequisites
Go To Full Code Chapter
Each of the following efficiency measures is required for all applicable components of the building project.
A4.203.1.1.1 Energy Design Rating
An energy design rating for the Proposed Design Building shall be computed by Compliance Software certified by the Energy Commission and this rating shall be included in the Certificate of Compliance documentation.
A4.203.1.1.2 Quality Insulation Installation (QII)
The QII procedures specified in the Building Energy Efficiency Standards Reference Residential Appendix RA3.5 shall be completed.
Related Code Sections
A4.203.1.1 Residential Voluntary Measures, Tier 1, Tier 2, and Zero Net Energy Design Prerequisites
An energy design rating for the Proposed Design Building shall be computed by Compliance ...
A4.203.1.1 Residential Voluntary Measures, Tier 1 and Tier 2 Prerequisites
TARGETS BY CLIMATE ZONES
CZ
Tier 1
Tier 2
Mixed Fuel
All-Electric
Mixed Fuel
All-Electric ...
A5.203.1.1 Nonresidential Voluntary Measures, Tier 1 and Tier 2 Prerequisites
To comply with Tier 1, ONE of the following efficiency measures is required for all applicable components of the building project. To comply ...
A5.203.1.1 Nonresidential Voluntary Measures, Tier 1 and Tier 2 Prerequisites
To comply with Tier 1, ONE of the following efficiency measures is required for all applicable components of the building project. To comply ...
A5.601.2.1 Nonresidential Voluntary Measures, Prerequisites
To achieve CALGreen tier status, a project must meet all of the mandatory measures in Chapter 5 and, in addition, meet the provisions of this section ...