// CODE SNIPPET
P2906.14 Threaded Pipe Joints
JUMP TO FULL CODE CHAPTER
Threaded joints shall conform to American National Taper Pipe Thread specifications. Pipe ends shall be deburred and chips removed. Pipe joint compound shall be used only on male threads.
Related Code Sections
P2906.14 Water Supply and Distribution, Threaded Pipe Joints
Threaded joints shall conform to American National Taper Pipe Thread specifications. Pipe ends shall be deburred and chips removed. Pipe joint ...
Residential Code 2018 of Kansas > 29 Water Supply and Distribution > P2906 Materials, Joints and Connections > P2906.14 Threaded Pipe Joints
1203.3.5 Hydronic Piping, Threaded Joints
lubricant, pipe-joint compound or tape shall be applied on the male threads only and shall be approved for application on the piping material ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1203 Joints and Connections > 1203.3 Joint Preparation and Installation > 1203.3.5 Threaded Joints
M2105.9.1 Hydronic Piping, Threaded Joints
for plastic pipe. Thread lubricant, pipe-joint compound or tape shall be applied on the male threads only and shall be approved for application ...
Residential Code 2018 of Kansas > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.9 CPVC Plastic Pipe > M2105.9.1 Threaded Joints
605.23 Water Supply and Distribution, Joints Between Different Materials
Joints between different piping materials shall be made with a mechanical joint of the compression or mechanical-sealing type, or shall be made ...
Plumbing Code 2018 of Kansas > 6 Water Supply and Distribution > 605 Materials, Joints and Connections > 605.23 Joints Between Different Materials
705.5.4 Sanitary Drainage, Threaded Joints
Threads shall conform to ASME B1.20.1. Pipe-joint compound or tape shall be applied on the male threads only ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 705 Joints > 705.5 Copper Pipe > 705.5.4 Threaded Joints