// CODE SNIPPET
P3003.1.1 Threaded Joints, General
JUMP TO FULL CODE CHAPTER
Pipe and fitting threads shall be tapered.
Related Code Sections
P3003.1.1 Sanitary Drainage, Threaded Joints, General
Pipe and fitting threads shall be tapered ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3003 Joints and Connections > P3003.1 Tightness > P3003.1.1 Threaded Joints, General
(E) Special Occupancies, Threading
engaged. Exception: For listed explosionproof equipment, joints with factory-threaded NPT entries shall be made up with at least four and one-half ...
National Electrical Code 2017 of Kansas > 5 Special Occupancies > 500 Hazardous (Classified) Locations, Classes I, II, and III, Divisions 1 and 2 > 500.8 Equipment > (E) Threading
6.5.1 System Components and Hardware, Threaded Pipe and Fittings
All threaded pipe and fittings shall have threads cut to ASME B1.20.1, Pipe Threads, General Purpose (Inch ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 6 System Components and Hardware > 6.5 Joining of Pipe and Fittings > 6.5.1 Threaded Pipe and Fittings
1203.3.5 Hydronic Piping, Threaded Joints
lubricant, pipe-joint compound or tape shall be applied on the male threads only and shall be approved for application on the piping material ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1203 Joints and Connections > 1203.3 Joint Preparation and Installation > 1203.3.5 Threaded Joints
1303.3.3 Fuel Oil Piping and Storage, Threaded Joints
Threads shall conform to ASME B1.20.1. Pipe-joint compound or tape shall be applied on the male threads only ...
Mechanical Code 2018 of Kansas > 13 Fuel Oil Piping and Storage > 1303 Joints and Connections > 1303.3 Joint Preparation and Installation > 1303.3.3 Threaded Joints