// CODE SNIPPET
E3702.4 Thirty-Ampere Branch Circuits
Related Code Sections
E3702.4 Branch Circuit and Feeder Requirements, Thirty-Ampere Branch Circuits
A 30-ampere branch circuit shall be permitted to supply fixed utilization equipment. A rating of any one cord-and-plug-connected utilization ...
Residential Code 2015 of Utah > 37 Branch Circuit and Feeder Requirements > E3702 Branch Circuit Ratings > E3702.4 Thirty-Ampere Branch Circuits
E3603.2 Services, Ungrounded Service Conductors for Accessory Buildings and Structures
than 15 amperes. [230.79(A)] For loads consisting of not more than two two-wire branch circuits, the service conductors shall have an ampacity ...
Residential Code 2015 of Utah > 36 Services > E3603 Service, Feeder and Grounding Electrode Conductor Sizing > E3603.2 Ungrounded Service Conductors for Accessory Buildings and Structures
E4002.1 Devices and Luminaires, Rating and Type
)] A single receptacle installed on an individual branch circuit shall have an ampere rating not less than that of the branch circuit ...
Residential Code 2015 of Utah > 40 Devices and Luminaires > E4002 Receptacles > E4002.1 Rating and Type
E4209.1 Swimming Pools, Ground-Fault Circuit-Interrupters
accessible ground-fault circuit-interrupter. All 125-volt, single-phase receptacles not exceeding 30 amperes and located within 6 feet (1829 mm) measured ...
Residential Code 2015 of Utah > 42 Swimming Pools > E4209 Hydromassage Bathtubs > E4209.1 Ground-Fault Circuit-Interrupters
E4002.1.2 Devices and Luminaires, Two or More Receptacles
Where connected to a branch circuit supplying two or more receptacles or outlets, receptacles shall conform to the values listed in Table E4002.1.2 ...
Residential Code 2015 of Utah > 40 Devices and Luminaires > E4002 Receptacles > E4002.1 Rating and Type > E4002.1.2 Two or More Receptacles