UpCodes logo
Go To Full Code Chapter
The height or thickness of a marquee measured vertically from its lowest to its highest point shall be not greater than 3 feet (914 mm) where the marquee projects more than two-thirds of the distance from the lot line to the curb line, and shall be not greater than 9 feet (2743 mm) where the marquee is less than two-thirds of the distance from the lot line to the curb line.

Related Code Sections

1404.12.2 Exterior Walls, Thickness
The thickness of thin exterior structural glass veneer shall be not less than 0.344 inch (8.7 mm) ...
1404.12.2 Exterior Walls, Thickness
The thickness of thin exterior structural glass veneer shall be not less than 0.344 inch (8.7 mm) ...
1705.14.4 Special Inspections and Tests, Thickness
Not more than 10 percent of the thickness measurements of the sprayed fire-resistant materials applied to floor, roof and wall assemblies ...
1705.15.4 Special Inspections and Tests, Thickness
Not more than 10 percent of the thickness measurements of the sprayed fire-resistant materials applied to floor, roof and wall assemblies ...
2604.2.2 Plastic, Thickness
The maximum thickness of the interior trim shall be 1/2 inch (12.7 mm) and the maximum width shall be 8 inches (204 mm) ...