// CODE SNIPPET
105.3 Testing of Systems
JUMP TO FULL CODE CHAPTER
Mechanical systems shall be tested and approved in accordance with this code or the Authority Having Jurisdiction. Tests shall be conducted in the presence of the Authority Having Jurisdiction or the Authority Having Jurisdiction's duly appointed representative.
No test or inspection shall be required where a mechanical system, or part thereof, is set up for exhibition purposes and has no connection with water or an energy fuel supply. In cases where it would be impractical to provide the required water or air tests, or for minor installations and repairs, the Authority Having Jurisdiction shall be permitted to make such inspection as deemed advisable in order to be assured that the work has been performed in accordance with the intent of this code. Joints and connections in the mechanical system shall be airtight, gastight, or watertight for the pressures required by the test.
In buildings or premises condemned by the Authority Having Jurisdiction because of an insanitary condition of the mechanical system, or part thereof, the alterations in such system shall be in accordance with the requirements of this code.
Where the Authority Having Jurisdiction finds that the work will not pass the test, necessary corrections shall be made, and the work shall be resubmitted for test or inspection.
Where prescribed tests and inspections indicate that the work is in accordance with this code, a certificate of approval shall be issued by the Authority Having Jurisdiction to the permittee on demand.
Related Code Sections
105.3 Administration, Testing of Systems
Mechanical systems shall be tested and approved in accordance with this code or the Authority Having Jurisdiction. Tests shall be conducted ...
Uniform Mechanical Code 2018 of Nevada > 1 Administration > 105.0 Inspections and Testing > 105.3 Testing of Systems
105.3 Administration, Testing of Systems
Plumbing systems shall be tested and approved in accordance with this code or the Authority Having Jurisdiction. Tests shall be conducted ...
Uniform Plumbing Code 2018 of Nevada > 1 Administration > 105.0 Inspections and Testing > 105.3 Testing of Systems
105.3.3 Administration, Approval
Where prescribed tests and inspections indicate that the work is in accordance with this code, a certificate of approval shall be issued ...
Uniform Plumbing Code 2018 of Nevada > 1 Administration > 105.0 Inspections and Testing > 105.3 Testing of Systems > 105.3.3 Approval
P2503.5.1 Plumbing Administration, Rough Plumbing
DWV systems shall be tested on completion of the rough piping installation by water or for piping systems other than plastic, by air with no evidence ...
Residential Code 2012 of Nevada > 25 Plumbing Administration > P2503 Inspection and Tests > P2503.5 DWV Systems Testing > P2503.5.1 Rough Plumbing
P2503.5.2 Plumbing Administration, Finished Plumbing
by visual inspection.
Gas tightness. When required by the local administrative authority, a final test for gas tightness of the DWV system shall be made ...
Residential Code 2012 of Nevada > 25 Plumbing Administration > P2503 Inspection and Tests > P2503.5 DWV Systems Testing > P2503.5.2 Finished Plumbing