// CODE SNIPPET
8.3.3.4.11 Testing of Bridging Means
Safety Code for Elevators and Escalators 2016 of New York State > 8 General Requirements > 8.3 Engineering Tests, Type Tests, and Certification > 8.3.3 Type Tests of Interlocks, Combination Mechanical Locks and Electric Contacts, and Door or Gate Electric Contacts > 8.3.3.4 Required Tests and Procedure > 8.3.3.4.11 Testing of Bridging Means
Go To Full Code Chapter
The electrical contact bridging means shall be tested to verify conformance to 2.12.2.4.1.
Related Code Sections
8.3.3.4.11 General Requirements, Testing of Bridging Means
The electrical contact bridging means shall be tested to verify conformance to 2.12.2.4.1 ...
Safety Code for Elevators and Escalators 2013 of New York State > 8 General Requirements > 8.3 Engineering Tests, Type Tests, and Certification > 8.3.3 Type Tests of Interlocks, Combination Mechanical Locks and Electric Contacts, and Door or Gate Electric Contacts > 8.3.3.4 Required Tests and Procedure > 8.3.3.4.11 Testing of Bridging Means
8.3.3.4.11 General Requirements, Testing of Bridging Means
The electrical contact bridging means shall be tested to verify conformance to 2.12.2.4.1 ...
Safety Code for Elevators and Escalators 2016 of New York State > 8 General Requirements > 8.3 Engineering Tests, Type Tests, and Certification > 8.3.3 Type Tests of Interlocks, Combination Mechanical Locks and Electric Contacts, and Door or Gate Electric Contacts > 8.3.3.4 Required Tests and Procedure > 8.3.3.4.11 Testing of Bridging Means
2308.5.7 Wood, Bridging
having a height-to-least-thickness ratio exceeding 50 shall have bridging that is not less than 2 inches (51 mm) in thickness and of the same width ...
2308.5.7 Wood, Bridging
having a height-to-least-thickness ratio exceeding 50 shall have bridging that is not less than 2 inches (51 mm) in thickness and of the same width ...
2308.9.9 Wood, Bridging
having a height-to-least-thickness ratio exceeding 50 shall have bridging not less than 2 inches (51 mm) in thickness and of the same width ...