// CODE SNIPPET
1709.7 Test Specimens
JUMP TO FULL CODE CHAPTER
Test specimens and construction shall be representative of the materials, workmanship and details normally used in practice. The properties of the materials used to construct the test assembly shall be determined on the basis of tests on samples taken from the load assembly or on representative samples of the materials used to construct the load test assembly. Required tests shall be conducted or witnessed by an approved agency.
Related Code Sections
1709.7 Special Inspections and Tests, Test Specimens
Test specimens and construction shall be representative of the materials, workmanship and details normally used in practice. The properties ...
2018 Philadelphia Building Code > 17 Special Inspections and Tests > 1709 Preconstruction Load Tests > 1709.7 Test Specimens
126.96.36.199 Earthquake-Resistant Structures,
) Details and materials used in the test specimens shall be representative of those used in the structure (c) The design procedure used to proportion ...
Building Code Requirements for Structural Concrete of Philadelphia > 18 Earthquake-Resistant Structures > 18.9 Special Moment Frames Constructed Using Precast Concrete > 18.9.2 General > 188.8.131.52
184.108.40.206 Construction Documents and Inspection,
Design information: (a) If supplementary tests of field-cured specimens are required to verify adequacy of curing and protection, the number ...
Building Code Requirements for Structural Concrete of Philadelphia > 26 Construction Documents and Inspection > 26.5 Concrete Production and Construction > 26.5.3 Curing Concrete > 220.127.116.11
218.104.22.168.4 Masonry, Modulus of Rupture Determination
) where, for the purposes of this section only: S w = Width of the test specimen measured parallel ...
2018 Philadelphia Building Code > 21 Masonry > 2109 Empirical Design of Adobe Masonry > 2109.2 Adobe Construction > 2109.2.1 Unstabilized Adobe > 222.214.171.124 Modulus of Rupture > 2126.96.36.199.4 Modulus of Rupture Determination
26.12.2 Construction Documents and Inspection, Frequency of Testing
Compliance requirements: (a) Samples for preparing strength test specimens of each concrete mixture placed each day shall be taken in accordance ...
Building Code Requirements for Structural Concrete of Philadelphia > 26 Construction Documents and Inspection > 26.12 Concrete Evaluation and Acceptance > 26.12.2 Frequency of Testing