// CODE SNIPPET
P2503.9 Test Gauges
JUMP TO FULL CODE CHAPTER
Gauges used for testing shall be as follows:
- Tests requiring a pressure of 10 psi or less shall utilize a testing gauge having increments of 0.10 psi (0.69 kPa) or less.
- Tests requiring a pressure higher than 10 psi (0.69 kPa) but less than or equal to 100 psi (690 kPa) shall use a testing gauge having increments of 1 psi (6.9 kPa) or less.
- Tests requiring a pressure higher than 100 psi (690 kPa) shall use a testing gauge having increments of 2 psi (14 kPa) or less.
Related Code Sections
1011.2 Boilers, Water Heaters and Pressure Vessels, Test Gauges
An indicating test gauge shall be connected directly to the boiler or pressure vessel where it is visible to the operator throughout the duration ...
Mechanical Code 2018 of Kansas > 10 Boilers, Water Heaters and Pressure Vessels > 1011 Tests > 1011.2 Test Gauges
312.1.1 General Regulations, Test Gauges
Gauges used for testing shall be as follows: Tests requiring a pressure of 10 pounds per square inch (psi) (69 kPa) or less shall utilize a testing ...
Plumbing Code 2018 of Kansas > 3 General Regulations > 312 Tests and Inspections > 312.1 Required Tests > 312.1.1 Test Gauges
705.3.6 Gaseous Hydrogen Systems, Test Gauges
Gauges used for testing shall be as follows: Tests requiring a pressure of 10 psig (68.95 kPa gauge) or less shall utilize a testing gauge having ...
Fuel Gas Code 2018 of Kansas > 7 Gaseous Hydrogen Systems > 705 (IFGC) Testing of Hydrogen Piping Systems > 705.3 Pressure Tests > 705.3.6 Test Gauges
P2503.9 Plumbing Administration, Test Gauges
Gauges used for testing shall be as follows: Tests requiring a pressure of 10 psi or less shall utilize a testing gauge having increments of 0.10 ...
Residential Code 2018 of Kansas > 25 Plumbing Administration > P2503 Inspection and Tests > P2503.9 Test Gauges
10.10.2.2 Underground Requirements, Hydrostatic Test
appurtenances subjected to system working pressure shall be hydrostatically tested at gauge pressure of 200 psi (13.8 bar) or 50 psi (3.4 bar) in excess ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 10 Underground Requirements > 10.10 Testing and Acceptance > 10.10.2 Acceptance Requirements > 10.10.2.2 Hydrostatic Test