UpCodes logo
Go To Full Code Chapter
1926.1002(g)(1)(i)
The laboratory mounting base shall include that part of the tractor chassis to which the protective frame is attached, including the mounting parts.
1926.1002(g)(1)(iii)
The protective frame and mounting connections shall be instrumented with the necessary recording equipment to obtain the required load-deflection data to be used in calculating FSB (see paragraph (j)(3) of this section). The gauges shall be placed on mounting connections before the installation load is applied.
1926.1002(g)(1)(ii)
The protective frame shall be instrumented with the necessary equipment to obtain the required load-deflection data at the locations and directions specified in Figures W-16, W-17, and W-18.

Related Code Sections