// CODE SNIPPET
(A) Terminals
JUMP TO FULL CODE CHAPTER
Connection of conductors to terminal parts shall ensure a thoroughly good connection without damaging the conductors and shall be made by means of pressure connectors (including set-screw type), solder lugs, or splices to flexible leads. Connection by means of wire-binding screws or studs and nuts that have upturned lugs or the equivalent shall be permitted for 10 AWG or smaller conductors.
Terminals for more than one conductor and terminals used to connect aluminum shall be so identified.
Related Code Sections
1023.3 Means of Egress, Termination
Interior exit stairways and ramps shall terminate at an exit discharge or a public way. Exception: A combination of interior exit stairways ...
Building Code 2018 of Illinois > 10 Means of Egress > 1023 Interior Exit Stairways and Ramps > 1023.3 Termination
1023.3 Means of Egress, Termination
Interior exit stairways and ramps shall terminate at an exit discharge or a public way. Exception: A combination of interior exit stairways ...
Building Code 2021 of Illinois > 10 Means of Egress > 1023 Interior Exit Stairways and Ramps > 1023.3 Termination
1024.4 Means of Egress, Termination
Exit passageways on the level of exit discharge shall terminate at an exit discharge. Exit passageways on other levels shall terminate at an exit ...
1024.4 Means of Egress, Termination
Exit passageways on the level of exit discharge shall terminate at an exit discharge. Exit passageways on other levels shall terminate at an exit ...
(A) General, Terminals
Connection of conductors to terminal parts shall ensure a thoroughly good connection without damaging the conductors and shall be made by means ...
National Electrical Code 2017 of Illinois > 1 General > 110 Requirements for Electrical Installations > 110.14 Electrical Connections > (A) Terminals