UpCodes logo
Jump To Full Code Chapter
ā€”
1910.262(t)(1) Stopping Devices
A stopping device shall be provided at each end of the machine.
1910.262(t)(2) Frame Ends
A guard shall be installed at each end of the frame at the in-running chain and clip opener.
1910.262(t)(3) Oil Cups
Oil cups shall be safely located to permit easy access.

Related Code Sections

1910.262(b)(36) Special Industries, Tenter Frame
A tenter frame is a machine for drying cloth under tension. It essentially consists of a pair of endless traveling chains fitted with clips of fine ...
1910.262(b) Special Industries, Definitions Applicable to This Section
A mercerizing range consists generally of a 3-bowl mangle, a tenter frame, and a number of boxes for washing ...
1910.262 Special Industries, Textiles
, a tenter frame, and a number of boxes for washing and scouring. The whole setup is in a straight line and all parts operate continuously. The combination ...
1910.262(s)(2) Special Industries, Frame Ends
A guard shall be installed at each end of the frame between the in-running chain and the clip opener, to prevent the worker's fingers from being ...
1910.265(b)(1) Special Industries, A-Frame
The term A-frame means a structure made of two independent columns fastened together at the top and separated at the bottom for stability ...