UpCodes logo
Jump To Full Code Chapter
For telescoping and bell-type connections, the inside duct section shall be uphill of the outside duct section. [NFPA 96:7.5.5.3]

Related Code Sections

510.5.5 Exhaust Systems, Telescoping and Bell-Type Connections
For telescoping and bell-type connections, the inside duct section shall be uphill of the outside duct section. [NFPA 96:7.5.5.3] ...
8.2.8.1.4 General Requirements, Telescoping Plungers
Telescoping plungers shall have each plunger section internally guided. If more than two movable sections are used, plunger follower guides shall ...
1810.3.9.5 Soils and Foundations, Belled Drilled Shafts
Where drilled shafts are belled at the bottom, the edge thickness of the bell shall not be less than that required for the edge of footings. Where ...
1810.3.9.5 Soils and Foundations, Belled Drilled Shafts
Where drilled shafts are belled at the bottom, the edge thickness of the bell shall be not less than that required for the edge of footings. Where ...
P3201.5 Traps, Prohibited Trap Designs
The following types of traps are prohibited: Bell traps. Separate fixture traps with interior partitions, except those lavatory traps made ...