// CODE SNIPPET
§28-207.2.5 Tampering
Go To Full Code Chapter
It shall be unlawful to tamper with, remove or deface a written posted stop work order from the location where it was affixed unless and until such stop work order has been rescinded by the commissioner. The owner or other person in control of the location shall ensure that the stop work order remains posted until rescinded by the commissioner.
Upcodes Diagrams
Related Code Sections
§28-207.2.5 Enforcement, Tampering
It shall be unlawful to tamper with, remove or deface a written posted stop work order from the location where it was affixed unless and until ...
§28-207.2.5 Enforcement, Tampering
It shall be unlawful to tamper with, remove or deface a written posted stop work order from the location where it was affixed unless and until ...
3301.8.1 Safeguards During Construction or Demolition, Use and Tampering Prohibited
Following an accident, no person shall permit any of the following without the permission of the commissioner, or without a lawful order from the New ...
3301.8.2 Safeguards During Construction or Demolition, Use and Tampering Prohibited
Following an incident, no person shall permit any of the following without the permission of the commissioner, or without a lawful order from the New ...
24.9.5.2.2 Emergency Communications Systems (ECS),
A tamper switch shall monitor all active components in non-secure
locations located remotely from the Fire Command Center such as amplifiers ...