// CODE SNIPPET
(A) Systems Not Exceeding 60 Volts Direct Current
Related Code Sections
(A) Special Equipment, Systems Not Exceeding 60 Volts Direct Current
Insulated conductors shall be permitted to be run without insulated support, provided they are protected from physical damage. Bare copper or aluminum ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 669 Electroplating > 669.6 Wiring Methods > (A) Systems Not Exceeding 60 Volts Direct Current
(D) Wiring and Protection, 600 Volts Between Conductors
Luminaires powered from direct-current systems where either of the following apply: The luminaire contains a listed, dc-rated ballast ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 210 Branch Circuits > 210.6 Branch-Circuit Voltage Limitations > (D) 600 Volts Between Conductors
(A) Wiring and Protection, Two-Wire, Direct-Current Systems
A 2-wire, dc system supplying premises wiring and operating at greater than 60 volts but not greater than 300 volts shall be grounded. Exception No ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.162 Direct-Current Circuits and Systems to Be Grounded > (A) Two-Wire, Direct-Current Systems
Article 712 Special Conditions, Direct Current Microgrids
in normal operation. Ungrounded DC System. A system that has no direct or resistive connection between the current-carrying conductors and the equipment ...
830.15 Communications Systems, Power Limitations
). Sources shall be classified as defined in Table 830.15. Direct-current power sources exceeding 150 volts to ground, but no more than 200 volts to ground ...
National Electrical Code 2020 of Minnesota > 8 Communications Systems > 830 Network-Powered Broadband Communications Systems > 830.15 Power Limitations