// CODE SNIPPET
1910.66(e)(2)(iii)(C) System Utilizing Angulated Roping and Building Face Rollers
JUMP TO FULL CODE CHAPTER
The system shall keep the equipment in continuous contact with the building facade, and shall prevent sudden horizontal movement of the platform. This system is acceptable only where the suspended portion of the equipment in use does not exceed 130 feet (39.6 m) above a safe surface or ground level, and where the platform maintains no less than 10 pounds (44.4 n) angulation force on the building facade.
Related Code Sections
1910.66(e)(2)(iii)(C) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, System Utilizing Angulated Roping and Building Face Rollers
The system shall keep the equipment in continuous contact with the building facade, and shall prevent sudden horizontal movement of the platform ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(e) Powered Platform Installations-Affected Parts of Buildings > 1910.66(e)(2) Tie-In Guides > 1910.66(e)(2)(iii) > 1910.66(e)(2)(iii)(C) System Utilizing Angulated Roping and Building Face Rollers
Appendix A Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Guidelines (Advisory)
guides are acceptable as tie-in guides in a building face for a continuous stabilization system. Internal guides are embedded in other building members ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > A Guidelines (Advisory)
1910.66(e)(2)(iii)(A) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms,
of the stabilizer ties will not cause the platform suspension ropes to angulate the platform horizontally across the face of the building. The anchors shall ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(e) Powered Platform Installations-Affected Parts of Buildings > 1910.66(e)(2) Tie-In Guides > 1910.66(e)(2)(iii) > 1910.66(e)(2)(iii)(A)
1910.66(e)(2)(iii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms,
of the stabilizer ties will not cause the platform suspension ropes to angulate the platform horizontally across the face of the building. The anchors ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(e) Powered Platform Installations-Affected Parts of Buildings > 1910.66(e)(2) Tie-In Guides > 1910.66(e)(2)(iii)
1910.66(e)(2)(ii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms,
If angulated roping is employed, tie-in guides required in paragraph (e)(2)(i) of this section may be eliminated for not more than 75 feet (22.9 m ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(e) Powered Platform Installations-Affected Parts of Buildings > 1910.66(e)(2) Tie-In Guides > 1910.66(e)(2)(ii)