UpCodes logo
Jump To Full Code Chapter
Refrigeration system zones that are connected to a higher pressure zone by an automatic crossover valve shall be designed to safely contain the maximum pressure that can be achieved by interconnection of the two zones.

Related Code Sections

63.9.7.2 Compressed Gases and Cryogenic Fluids,
Piping, tubing, and hoses and fittings shall be designed to a bursting pressure of at least four times the system design pressure. [55:13.3.3.2] ...
Section 1208 Hydronic Piping, Tests
Hydronic piping systems shall be tested hydrostatically at one and one-half times the maximum system design pressure, but not less than 100 psi (689 ...
801.9 Chimneys and Vents, Positive Pressure
Where an appliance equipped with a forced or induced draft system creates a positive pressure in the venting system, the venting system shall ...
603.5.14.3 Water Supply and Distribution, Hydraulic Design
of the sprinkler system design shall be checked to verify that there will be sufficient water pressure available for satisfactory operation of the fire sprinklers ...