// CODE SNIPPET
[BS] A206.5 Symmetry
JUMP TO FULL CODE CHAPTER
Symmetry of wall anchorage and continuity connectors about the minor axis of the framing member is required.
Exception: Eccentricity may be allowed when it can be shown that all components of forces are positively resisted. The resistance must be supported by calculations or tests.
Related Code Sections
A206.5 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms, Symmetry
Symmetry of wall anchorage and continuity connectors about the minor axis of the framing member is required.
Exception: Eccentricity may ...
Existing Building Code 2015 of Idaho > A2 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms > A206 Analysis and Design > A206.5 Symmetry
Section A206 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms, Analysis and Design
Symmetry of wall anchorage and continuity connectors about the minor axis of the framing member is required ...
Existing Building Code 2015 of Idaho > A2 Earthquake Hazard Reduction in Existing Reinforced Concrete and Reinforced Masonry Wall Buildings With Flexible Diaphragms > A206 Analysis and Design