// CODE SNIPPET
1910.255(c)(4) Switch Guards
JUMP TO FULL CODE CHAPTER
All initiating switches, including retraction and dual schedule switches, located on the portable welding gun shall be equipped with suitable guards capable of preventing accidental initiation through contact with fixturing, operator's clothing, etc. Initiating switch voltage shall not exceed 24 volts.
Related Code Sections
1910.255(c)(4) Welding, Cutting, and Brazing, Switch Guards
All initiating switches, including retraction and dual schedule switches, located on the portable welding gun shall be equipped with suitable guards ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.255 Resistance Welding > 1910.255(c) Portable Welding Machines > 1910.255(c)(4) Switch Guards
1910.213(s)(6) Machinery and Machine Guarding,
of guards and the prevention of fire hazards in switch enclosures, bearings, and motors ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(s) Inspection and Maintenance of Woodworking Machinery > 1910.213(s)(6)
1910.261(e)(12) Special Industries, Continuous Barking Drums
1910.23, Guarding floor and wall openings and holes ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(e) Preparing Pulpwood > 1910.261(e)(12) Continuous Barking Drums
1910.269(v)(11)(xi) Special Industries,
contact from drive areas, loading areas, transfer points, and other locations on the conveyor path not guarded by location, position, or guards shall ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(v) Power Generation > 1910.269(v)(11) Coal and Ash Handling > 1910.269(v)(11)(xi)
1910.243(a)(2)(i) Hand and Portable Powered Tools and Other Hand-Held Equipment,
without positive accessory holding means shall be equipped with a constant pressure switch or control that will shut off the power when the pressure ...
OSHA 1910 General Industry > P Hand and Portable Powered Tools and Other Hand-Held Equipment > 1910.243 Guarding of Portable Powered Tools > 1910.243(a) Portable Powered Tool > 1910.243(a)(2) Switches and Controls > 1910.243(a)(2)(i)