// CODE SNIPPET
(A) Surface Type
Related Code Sections
(A) Equipment for General Use, Surface Type
the conductors at least 13 mm ( 1 / 2 in.) from the surface wired over ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 404 Switches > 404.10 Mounting of General-Use Snap Switches, Dimmers, and Control Switches > (A) Surface Type
220.127.116.11 Electric Elevators, Hinges
Hinges of the mortise and surface type shall conform to the requirements of NFPA 80, Table 2-4.3.1 ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 2 Electric Elevators > 2.11 Protection of Hoistway Openings > 2.11.13 Entrances, Swinging Type > 18.104.22.168 Hinges
398.42 Wiring Methods and Materials, Devices
Surface-type snap switches shall be mounted in accordance with 404.10(A), and boxes shall not be required. Other type switches shall be installed ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 398 Open Wiring on Insulators > 398.42 Devices
312.2 Wiring Methods and Materials, Damp and Wet Locations
In damp or wet locations, surface-type enclosures within the scope of this article shall be placed or equipped so as to prevent moisture or water ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 312 Cabinets, Cutout Boxes, and Meter Socket Enclosures > 312.2 Damp and Wet Locations
(D) Equipment for General Use, Open-Coil or Exposed Sheathed-Coil Types of Surface Heating Elements in Commercial-Type Heating Appliances
Open-coil or exposed sheathed-coil types of surface heating elements in commercial-type heating appliances shall be protected by overcurrent ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 422 Appliances > 422.11 Overcurrent Protection > (D) Open-Coil or Exposed Sheathed-Coil Types of Surface Heating Elements in Commercial-Type Heating Appliances