// CODE SNIPPET
C3.2.1 Surface Exposure
Related Code Sections
C3.2.1 Normative Appendix C Methodology for Building Envelope Trade-Off Option in Section 5.6, Surface Exposure
Semiexterior surfaces separating conditioned spaces from unconditioned spaces shall be simulated as exterior surfaces with no exposure to wind ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > Normative Appendix C Methodology for Building Envelope Trade-Off Option in Section 5.6 > C3 Simulation General Requirements > C3.2 Climatic Data > C3.2.1 Surface Exposure
1609.4.3 Structural Design, Exposure Categories
to 30 feet (9144 mm), Exposure B shall apply where the ground surface roughness, as defined by Surface Roughness B, prevails in the upwind direction ...
Building Code 2018 of Illinois > 16 Structural Design > 1609 Wind Loads > 1609.4 Exposure Category > 1609.4.3 Exposure Categories
704.13.5 Fire and Smoke Protection Features, Finished Condition
, delamination or any exposure of the substrate. Surface irregularities of SFRM shall be deemed acceptable ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 704 Fire-Resistance Rating of Structural Members > 704.13 Sprayed Fire-Resistant Materials (SFRM) > 704.13.5 Finished Condition
Chapter 14 Exterior Walls
exposure and surface burning characteristics. Code development reminder: Code change proposals to sections preceded by the designation [BS ...
2508.2 Gypsum Board, Gypsum Panel Products and Plaster, Limitations
Gypsum wallboard or gypsum plaster shall not be used in any exterior surface where such gypsum construction will be exposed directly to the weather ...
Building Code 2018 of Illinois > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2508 Gypsum Construction > 2508.2 Limitations