// CODE SNIPPET
(5) Surface Coverings
Related Code Sections
(5) Equipment for General Use, Surface Coverings
Surfaces permitted by 424.93(A)(4) shall be permitted to be covered with paint, wallpaper, or other approved surfaces identified ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.93 Installation > (A) General > (5) Surface Coverings
1220.127.116.11 Interior Environment, Ventilation Area for Crawl Spaces With Covered Floors
The net area of ventilation openings for crawl spaces with the ground surface covered with a Class I vapor retarder shall be not less than 1 ...
2020 Minnesota Building Code > 12 Interior Environment > 1202 Ventilation > 1202.4 Under-Floor Ventilation > 1202.4.1 Ventilation Openings > 118.104.22.168 Ventilation Area for Crawl Spaces With Covered Floors
(B) Special Occupancies, Mounting
be permitted to be mounted directly to any building surface covered by this article without maintaining the 6 mm ( 1 / 4 in.) airspace in accordance with 300.6 ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 547 Agricultural Buildings > 547.5 Wiring Methods > (B) Mounting
1203.3.2 Interior Environment, Exceptions
of the under-floor area where the ground surface is covered with a Class I vapor retarder material and the required openings are placed so ...
Minnesota Building Code 2015 > 12 Interior Environment > 1203 Ventilation > 1203.3 Under-Floor Ventilation > 1203.3.2 Exceptions
222.214.171.124 Masonry, Exterior Finish
Exterior walls constructed of unstabilized adobe units shall have their exterior surface covered with a minimum of two coats of Portland cement ...
Minnesota Building Code 2015 > 21 Masonry > 2109 Empirical Design of Masonry > 2109.3 Adobe Construction > 2109.3.4 Detailed Requirements > 2126.96.36.199 Exterior Finish