// CODE SNIPPET
1105.2 Supports and Anchorage
JUMP TO FULL CODE CHAPTER
Supports and anchorage for refrigeration equipment and piping shall be designed in accordance with the building code as Occupancy Category H (hazardous facilities). Supports shall be made of noncombustible materials.
Exceptions:
- Equipment containing Group A1 refrigerants shall be permitted to be supported by the same materials permitted for the building type.
- The use of approved vibration isolators specifically designed for the normal, wind, and seismic loads encountered, shall be permitted.
A compressor or portion of a condensing unit supported from the ground shall rest on a concrete or other approved base extending not less than 3 inches (76 mm) above the adjoining ground level.
Related Code Sections
1105.2 Refrigeration, Supports and Anchorage
Supports and anchorage for refrigeration equipment and piping shall be designed in accordance with the building code as Occupancy Category H ...
2018 Uniform Mechanical Code of Nevada > 11 Refrigeration > 1105.0 General Requirements > 1105.2 Supports and Anchorage
1120.0 Refrigeration, Support and Anchorage
Cooling towers, evaporative condensers, and fluid coolers shall be supported on noncombustible grillage designed in accordance with the building code ...
1607.10.4 Structural Design, Fall Arrest and Lifeline Anchorages
In addition to any other applicable live loads, fall arrest and lifeline anchorages and structural elements that support these anchorages shall ...
Building Code 2018 of Nevada > 16 Structural Design > 1607 Live Loads > 1607.10 Impact Loads > 1607.10.4 Fall Arrest and Lifeline Anchorages
2104.1.2 Masonry, Molded Cornices
Unless structural support and anchorage are provided to resist the overturning moment, the center of gravity of projecting masonry or molded cornices ...
Building Code 2018 of Nevada > 21 Masonry > 2104 Construction > 2104.1 Masonry Construction > 2104.1.2 Molded Cornices
2104.2.1 Masonry, Molded Cornices
Unless structural support and anchorage are provided to resist the overturning moment, the center of gravity of projecting masonry or molded cornices ...
Building Code 2012 of Nevada > 21 Masonry > 2104 Construction > 2104.2 Corbeled Masonry > 2104.2.1 Molded Cornices