UpCodes logo
Go To Full Code Chapter
Glass shall be firmly held in place. The supports shall be of adequate strength to resist the applicable design wind loads as prescribed in subchapter nine of this chapter.

Related Code Sections

§27-644 Structural Work, Support for Glass Panels
Glass shall be firmly held in place. The supports shall be of adequate strength to resist the applicable design wind loads as prescribed ...
2110.4 Masonry, Support
the framing restraints and the glass unit masonry perimeter units. Lateral supports for glass unit masonry panels shall be designed to resist applied loads ...
2407.1.2 Glass and Glazing, Support
Each handrail or guard section shall be supported by a minimum of three glass balusters or shall be otherwise supported to remain in place should one ...
2407.1.2 Glass and Glazing, Support
Each handrail or guard section shall be supported by a minimum of three glass balusters or shall be otherwise supported to remain in place should one ...
2407.1.2 Glass and Glazing, Support and Framing
Support and framing of glass used in handrails and guards shall comply with the requirements of Sections 2403.2 and 2403.3. In glass structural ...