// CODE SNIPPET
(2) Supplied by a Separately Derived System
Go To Full Code Chapter
(a) With Overcurrent Protection. If overcurrent protection is provided where the conductors originate, the installation shall comply with 250.32(C)(1).
(b) Without Overcurrent Protection. If overcurrent protection is not provided where the conductors originate, the installation shall comply with 250.30(B). If installed, the supply-side bonding jumper shall be connected to the building or structure disconnecting means and to the grounding electrode(s).
Upcodes Diagrams
Related Code Sections
(2) Wiring and Protection, Supplied by a Separately Derived System
with 250.30(B). If installed, the supply-side bonding jumper shall be connected to the building or structure disconnecting means and to the grounding ...
(2) Wiring and Protection, Supplied by a Separately Derived System
(B). If installed, the supply-side bonding jumper shall be connected to the building or structure disconnecting means and to the grounding electrode(s) ...
647.5 Special Equipment, Three-Phase Systems
Where 3-phase power is supplied, a separately derived 6-phase "wye" system with 60 volts to ground installed under this article shall be configured ...
647.5 Special Equipment, Three-Phase Systems
Where 3-phase power is supplied, a separately derived 6-phase "wye" system with 60 volts to ground installed under this article shall be configured ...
647.6 Special Equipment, Grounding
means supplied by the separately derived system. The equipment grounding conductor shall not be smaller than that specified in Table 250.122 and run ...